| The US
standard railroad gauge distance (between the rails) is
4 feet 8.5 inches. That's an exceedingly odd number.
Why was that gauge used? Be- cause that's the way they
built them in England, and English expatriates built the
US railroads.
Why did the English build them like that? Because the first
rail lines were built by the same people who built the pre-railroad
tramways, and that's the gauge they used.
Why did "they" use that gauge then? Because the people
who built the tramways used the same jigs and tools that
they used for building wagons, which used that wheel spacing.
Okay! Why did the wagons have that particular odd wheel
spacing? Well, if they tried to use any other spacing, the
wagon wheels would break on some of the old, long distance
roads in England, because that's the spacing of the wheel
ruts.
So who built those old rutted roads? The first long distance
|
roads in Europe (and England) were built by Imperial Rome
for their legions. The roads have been used ever since.
And the ruts? Roman war chariots first made the initial
ruts, which everyone else had to match for fear of destroying
their wagon wheels and wagons. Since the chariots were made
for, or by Imperial Rome, they were all alike in the matter
of wheel spacing.
Thus, we have the answer to the original question. The
United States standard railroad gauge of 4 feet, 8.5 inches
derives from the original specification for an Imperial
roman'war chariot.
Specifications and bureaucracies live forever. So, the
next time you are handed a specification and wonder which
horses rear came up with it, you may be exactly right. Because
the Imperial Roman war chariots were made just wide enough
to accommodate the back ends of two war-horses.
And now,
the twist to the story . . .
|
There's an interesting extension to the story about railroad
gauges and horses' behinds. When we see a Space Shuttle
sitting on its launch pad, there are two big booster rockets
attached to the sides of the main fuel tank. These are solid
rocket boosters, or SRBs. Thiokol makes the SRBs at their
factory at Utah. The engineers who designed the srbs might
have preferred to make them a bit fatter, but the SRBs had
to be shipped by train from the factory to the launch site.
The railroad line from the factory had to run through a
tunnel in the mountains. The SRBs had to fit through the
tunnel. The tunnel is slightly wider than the railroad track,
and the railroad track is about as wide as two horses be-
hinds.
So, the major design feature of what is arguably the world's
most advanced transportation system was determined by the
width of a Horse's (rear)!
THINK ABOUT IT!
|